Behringer System 55 Complete Modular Synth

$98.99 ~~$3.00~~

Qty. :

Category : Synthesizers

Complete \System 55\ Modular Synthesizer with 25 Modules, MIDI-to-CV Converter and 2 EURORACK GO cases

The first System 55, 35 and 15 synth modules came out in the early '70s and tended to be extremely expensive. They were mainly all discrete transistor designs as op-amps at the time were very high cost. The discrete circuitry gave the modules a very distinctive sound and were used by artists like Keith Emerson, Stevie Wonder, Tangerine Dream and so many more, giving us some of the greatest records weve ever heard. Modular synths were a landmark development in electronic music and today, its about to get better.

Features

Pre-assembled SYSTEM 55 modular synthesizer with 38 vintage sounding modules from the 70s
1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz - 5.6 kHz and LP/HP filters
1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
5x 902 VOLTAGE CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
4x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
1x 911A DUAL TRIGGER DELAY module with S-trig input and output
2x 921A OSCILLATOR DRIVER with 6x 921B VCOs and 1x 921 VCO gives you 7 fully featured voices
1x 960 SEQUENTIAL CONTROLLER module provides up to 24-step sequences in 8 steps with 3 rows
1x CM1A MIDI to CV converter enables control by MIDI keyboards or DAW, V-trig or S-trig outputs
3x CP3A-O module allows CV mixing and switching for the VCOs with 1 attenuator
3x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
2x 995 ATTENUATORS modules with 3 linked passive attenuators
1x 903A RANDOM SIGNAL GENERATOR module provides dual white and pink noise sources
1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
1x 962 SEQUENTIAL SWITCH module expands the 960 module into a 24 step sequencer
1x BP28, 2x BP56 and 2x BP2 blanks panels for a total of 144HP expansion space
1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
2x EURORACK GO cases including PSUs
2x EURORACK GO BRACKETS to link the 2 EURORACK GO cases together for easy patching